Home / 🌐Internet / 📡 Networks / How to hack into WPA2 Wi-Fi networks to get free Internet anywhere? Step by step guide

Rate this post

Some people resort to hacking into their neighbors’ WiFi accounts without knowing whether it is a crime or not . Here we will tell you what the legal approach in Spain is to this type of activity and what the legal sentence would be, if you would take it as a criminal activity .

In the following paragraphs you will find all the information you need to know how hackers get into your wireless home internet signal. We will tell you which programs they use and the steps they need to take to “bypass a password” with WPA2 protocol .

If you want to perform a WiFi network audit , read on because we will explain the risks this brings to your computer.

Index:

What are the risks of hacking into WiFi networks in Spain?

The Criminal Code of 2015, in its Article 248 belonging to Chapter VI of Frauds , establishes in paragraph 2, section a , that persons who have a profit motive or who can use some computer manipulation and obtain a signal transfer , a service or any asset that is not consented to by an owner and that is prejudiced against its owner, is deemed to be in breach of this part of the article.

That is, a person who steals a WiFi signal from a neighbor is committing a crime punishable by law . This is because, by fraudulent actions, a person manages to benefit from an asset of a user, who has contracted a service from a telephone operator and pays for it a certain price for a specific amount of gigs .

Don’t forget that when a person connects to a WiFi network illegally he is slowing down, as there is a set bandwidth that must be spread over more connected devices .

Although this offence carries a penalty , set out in Article 249 of the said Code, of imprisonment from six months to three years , it is not always possible to determine who the intruder is quickly. This is the responsibility of the police and also of other comptroller agencies that may act ex officio. To prevent intrusions into your wireless network, it is recommended that you reinforce the security of your network with efficient mechanisms.

What do I need to hack into WPA2 wireless internet networks?

There are different security protocols within a WiFi network. These encryptions make it more or less difficult to gain unauthorised access to the network . The most secure protocol is WPA2, which was considered inviolable until a few years ago, but a group of hackers demonstrated a technique with which security can be broken and the connection intercepted.

Recommended for you:
How to extract the audio from a YouTube video quickly and easily? Step-by-step guide
 

To be able to hack a wireless network with WPA2 security it is necessary to be as close as possible to the router in order to have access to a signal that is not weak. Then you will need the router not to have any special filtering to prevent access by intruders, such as a MAC address filter.

Another thing needed to intercept the network is that the signal is visible . That is, the device with which the intruder is going to hack the network must pick up the frequency. Therefore, if the SSID is broadcast invisibly, the password cracking process cannot be valid. In addition, the hacker will need special software to be able to carry out an attack and thus be able to circumvent WiFi security.

Steps to connect to any WiFi network with WPA2 security easily and quickly

Here’s how hackers connect to a WiFi network with WPA2 security Remember that this is a crime and on this site we are against these illicit activities .

We will only tell you what work people do:

With Acrilyc WiFi

The advantage of using this tool is that you can do it through Windows. So you won’t need to use Kali Linux to access WiFi WPA2 network audits.

The steps you will need to take are as follows:

  • The first thing you need to do is download “Acrilyc WiFi” and install it on your computer (see below for the download link).
  • Also you will need to download a master dictionary with all the passwords. Please note that there are several of these that you can work with according to your taste. (The download link is also available)
  • Next, you should open the program on your computer and you will see a control panel where you will have a list of all the available networks that are close to you. You will see in the first column the name of each of these . In order to choose the WPA2 security network you will need to go to the column with the same name.
  • Press “Stop” , in the upper right margin to stop the network audit. To do this, you must press an icon represented by a square .
  • Choose the WiFi network, see what its password is and right click.
  • Select “Send to connectivity module” .
  • A pop-up window will appear showing you the interface. In this, you will have to incorporate the password directory that you have previously downloaded. In this case, just follow the steps as you do when you want to upload any information with a file browser.
  • When you are done, you must click on “Ok” , to upload the file. We recommend the txt “PASSWORDS” .
  • At the bottom of the control panel you will see the name of the network you want to verify its password, authentication status and encryption. You should right click on this network .
  • Choose the option “Start” .
  • At this point, the status of the process will appear on the right side of this panel. Once it has found the password it will show you a message saying “Password found, plus password to access” .
Recommended for you:
Airplane mode What is it, what is it for and how do you activate it on your mobile device?
 

Download Acrilyc WiFi Windows

Download Wifi Windows Auditing Dictionary

Download Wifi Auditing Dictionary WPA-PSK Windows

Download Wifi Audit Dictionary WPA and WPA2 Windows

With JumpstarWPS

To be able to audit nearby WiFi signals through Windows you will need to do this guide:

  • Download to your computer “JumpstarWPS” .
  • Open the file you downloaded. Then, you will have to search inside the folder that was generated for the file compressed “JumpstarWPS” .
  • Choose the application to install, “Setup” .
  • When you have the program on your computer, you should open the file “Wps-pin” . It will contain the PINs of the networks you are looking for.
  • Select the network you want to join by double clicking on it .
  • A window will open in which you will see the network information. At this stage you must copy the first PIN and close the dialog box.
  • Then you must open “JumpstarWPS” . For this, you have to click on “Next” .
  • Copy the PIN you entered in the previous window.
  • Click on “Next” and uncheck the box “Automatically select the network” .
  • Choose the network you want to join by clicking on “Next” .
  • After a few moments your computer will be connected to the chosen WiFi. Click on “Finish” .
  • To find out what the key is, you must open the Network Center on the taskbar.
  • The software will automatically show you the network security key.

Download JumpstarWPS Windows

List of the best applications and tools for hacking WiFi networks with WPA2 security in 5 minutes

The previous applications we have shown are one of the most complete that exist today. But are not the only ones with which you can hack into a WiFi WPA2 network .

Below, we’ll show you the most comprehensive tools you can install on your Windows computer to perform a wireless network audit:

WiFi Password Revealer

This is a free program for recovering passwords that users have forgotten to enter the WiFi. This software can find any password that has standard WPA, WEP, WPA-PSK, WPA2 or WPA2-PSK encryption. R

It is compatible with Windows operating systems that have either a 32-bit or 64-bit architecture . In just a few seconds you can have the SSID and HEX data available.

Download WiFi Password Revealer Windows

AirSnort

It is considered one of the most popular programs among people who are interested in knowing the WPA2 passwords of nearby WiFi signals. This is due to a very simple tool to handle with which you can know in a few minutes the encoding that the networks have to access the network.

The steps to use it are very simple. Just open the program and press “Start” , then choose the network you need and with a few more clicks you will find what you are looking for.

Download AirSnort Linux

Wifi Password Decryptor 12.0

It has the ability to decrypt WPA2 keys , as well as supporting different encryption algorithms used in wireless networks, such as Aes and Tkip .

Recommended for you:
How do I create an account at Xing to find work on the Asian platform? Step by step guide
 

It is available for Windows and features time-saving commands for your work. This will allow you to make 2 or 3 clicks and be able to know the key you are looking for. Many users consider as one of the best programs to perform network audits with WPA2.

Download Wifi Password Decryptor Windows

WiFi Password Dump

This program works with the Windows command line , but you don’t have to worry about it as it is very easy to use. Once you run the software you can quickly find the name of the network you are looking for, as well as the security protocol (WPA2) and the access password.

Download WiFi Password Dump Windows

WiFi Password Recovery Pro

You have a 7-day trial version . You will be able to recover your WiFi password by deciphering the ones near your computer. In addition to this, it will also help you protect networks from being hacked. Its graphical interface presents a multi-coloured screen showing the result of the report, location of the problems, and the security of the neighbouring networks.

You will have the option to save the passwords in a HTML , JSON, CSV, SQLite or XML file.

Download WiFi Password Recovery Pro Windows

Is it safe to use these types of programs and applications to steal the WiFi signal?

When you use one of these tools, are sometimes unsafe . This is because there is a possibility that the files with the EXE extension , are not the executable files for this purpose. So, it can happen, that will end up downloading a virus without you realizing it . This happens frequently, as one of the easiest spreads of malware is through these types of programs.

In addition, by offering a solution for obtaining a password, programs can also be installed with codes that allow everything typed by the user to be recorded. This is what we call in computing a keylogger.

Another point to take into account is that there have been cases where, when downloading these programs, they generate a file hijacking, blocking the user’s access . So also using password detectors, also generate a risk against the privacy of the owners of the computers.

But this is not the only thing, if we don’t analyze these programs from a malware point of view, we can also see it from the errors in their design that they may have . So, by installing them they unintentionally damage apps and other software codes that exist on the computer.

To avoid these problems, it is always necessary to know the applications you want to install and that they are recommended from a secure source, just like the ones we showed you before.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and for sure it will be of a great help for other members of the community. Thank you! 😉

 
 

Leave a Reply

Your email address will not be published. Required fields are marked *